Airopower Systems

• Optimized for Small Pipes: Specially designed for 20 mm diameter PVC pipes, ideal for conduit, telecom, and light plumbing use.
• Supported Pipe Range: Compatible with 16 mm to 25 mm pipe diameters (customizable as needed).
• Socket Types:
• Solvent Cement Socket (standard)
• Optional: Plain or Light SWR Socket
•  Precision Heating System:

Feature,

• Semi Automatic pneumatically operated smooth socket PVC Pipe end belling machine from 50mm to 200mm with one forming station of Solid Steel mandrell & cooling by External water pump spray, Monogram Embossing & Ejection Automatic cyclic operation.
•  Two Heating cavities of each size with S. S. Heaters mounted for heating Socket portion of pipes.
•  Compact machine with all in one digital process micro controller completely wired & plumbed unit.
• 40mm & 50mm Punch , 63mm to 200mm punch + Guide 4 kg full Set ,   6 Kg , 8 Kg  , 10 Kg additional interchangeable Tooling parts)
• Solenoid Valve           : 5/2 x ¼ “ ( 2 Nos)
• Pneumatic Cylinder   : 100 x 100 Ejector Cylinder
• Pneumatic Cylinder : 50 x 100 Embossing Cylinder
• Shaft Pin (2 Nos)    :  63 -  110 (Small Shaft Pin) / 125 – 200 ( Long Shaft Pin)

Feature,

• Socketing Types Supported:
• Solvent Cement Type Socket
• Optional: Plain or Light SWR Socket
• Efficient Heating System:
• Uses infrared or hot air oven for uniform pipe end heating
• Accurate temperature control for small pipe sizes

• Pipe Size Compatibility: Specially designed for 50 mm diameter PVC pipes; supports a size range from 40 mm to 63 mm (optional tooling available).
• Fully Automatic Operation:
• Automated pipe feeding, heating, belling (socketing), and ejection
• Minimizes manual intervention and increases production efficiency

Airopower Auto bell PVC Pipe Socketing Machine from 50mm – 200mm Pipe end Socketing (Smooth socket /Grooved Socket) with Leaner pipe movement through top sliding shifter from infeed conveyor to heating station one, Heating Station two, forming station to out feed station.

 Fully electro pneumatically operated machine with 2 meters + 2 meter infeed belt conveyor. Full Stainless steel infrared heating Chamber, and pneumatically operated forming station with positive lock system. 7” HMI & control panel consisting PLC to achieve accurate operation conveniently.

1.    Basic Machine:           2300mm x 1700mm x 2100mm H

2.    Pipe Support Bed:      2300mm x 2200mm x 700mm H

3.    In feed Conveyor:       250mm x 2200mm x 680mm H – 2 Nos

4.    Out feed Conveyor:    270mm x 3000mm x 680mm H ( Optional)

5.    Pipe Extrusion Output : upto 550 kgs/ Hr

6.    Pipe sizes                    : 50 mm – 200mm

7.    Pipe lengths :              650mm – 6000 mm

1.    After socketing Pipe stacking Leaner or Side of machine.: Opetional

2.     Pipe Weight measurement and Recorded required  : Opetional

3.     Pipe weight Min : 150grm

4.    Pipe weight Max : 100 Kgs

5.     Pipe Standards to be used.:

6.    General ambient Temperature.: ---------

7.     Power Connection Voltage and frequency. : 16 KW

8.    Water input Temperature.: 18 Kgs

9.    Air Pressure connection 8-10Bar:  yes/ No.

10.  Extruder line Center from Ground.: 900mm – 1100mm
Extrusion type Single /Double.: Single